Compared with the simple sandblasters or multi-stations, you will take advantage of easily recognizable advantages. Ideal for the manufacturers of staircase and panels. From rough to finishing in one time ! This machine can be used for planing, sanding or both.

Planer head in first position combined with sanding unit and all the feeding components. Antikickback fingers, rubber coated pressure roller and independent segment pressure shoe installed prior to planer head for safe operation and stable feeding.

Spiral cutter head lower power requirement, lower production costs and less noisy. Planer head makes a grit 100 finishing.

Planer head (P) of 5’’(D) made of steel with spiral design for heavy stock removal. 248 TCT tips of 15 x 15 x 2,5 mm on six(6) rows. Each knife has four(4) usable cutting edges. Easy access to planer head for tips rotation.

Precision dial indicator using to show the exact position of planer head.

No noise and smoother oscillation ! Belt oscillation electronically controlled for substantial com-pressed air saving. This invisible beam system is not affected by dust.

Due to heavy stock removal on combination head for a superior quality of finishing (one drum and one sanding pad), it can achieves flat surfaces. Using grit 120 or 150 on sanding head for finishing sanding in a single pass.

High feeding speed. Variable feeding speed adjustments suitable for various kinds of stock characteristics.

Elevation table with four(4) screws.

Centralized control panel with numerical read-out (metric or imperial) for a precise sanding. Ammeter indicating the current on the main motor.

High quality electrical control box, CSA approved, electrical components ensuring maximum dependability, with an outstanding performance and a long-lasting service.